Make sure your using the item on a VW, Audi, Skoda or Seat vehicle. Make sure your using software Version 311.2 or 409.1 from. First, make sure all directions above for installing driver files and configuring the COM Port where performed. For more detailed troubleshooting, see the User's Manual above. It should display "Interface Status: Found!". 
* The USB option is only available for Ross-Tech made USB Cables. In the "Select COM Port" box, select the "COM Port" that the device uses as displayed in the Device Manager.
Plug the cable into the computer and into your vehicles socket. Testing the COM Port in the Vag-Com Software Make a note of the COM Port number for setting the Vag-Com software. If you need to change it, double click the device, click the "Port Settings" tab, click "Advanced", then change the "COM Port Number". Verify that the device "USB KKL Interface VCP" has its own COM Number that is not in use by another port. In the Console Tree, double click "Ports (COM & LPT)". Open the "Control Panel", click the "System" icon, in the "Hardware" tab Click "Device Manager". Plug the Vag-Com Cable into an available USB port on your computer. This is the COM Port setting you use when you "Test" the interface in the Vag-Com software setup. Open the Device Manager and determine which COM Port the cable is using and make sure it occupies its own COM Port. Installation under Windows 98/ME/2000 is similar, but not necessarily identical. 
Note: These instructions are for Windows XP (which we recommend).
"Hardware Installation" screen pops up. Use the button to find the folder you saved the driver files in. Select "Search for the best driver in these locations"Ĭheck "Include this location in the search:" choose "Install from a list or specific location (Advanced)" "Found New Hardware Wizard" will start. (It is not necessary to connect the interface to the vehicle yet) Plug your Ross-Tech USB Interface to your PC's USB port. 
If your version of windows does not support the ".rar" format, you can enable the format here.
Open the driver file and "unzip" the file into its own folder.It is recommended that you save it in its own folder on your computer for future use. Make sure you have already downloaded and installed VAG-COM Software on your PC before following these instructions. Note: These instructions are for Windows XP (which we recommend).
0 kommentar(er)
